Sand Washing Machine

This series XSD Sand Washing Machines are a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which mixes with the final sand, Its novel seal structure, the reliable transmission device, guarantees the elution water effect, is one kind of highly effective sand washer that coordinates with sand making machine. Sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservation and cement mixture station and so on. Our sand washer has the characteristics of high cleaning,reasonable structure,big process load, small power loss, low loss of substances in process of washing.

Application:

Sand Washing Machine mainly used in building site, sand factory, concrete dam, sand for foundry, and quartz sand for glass, wash, classification, dehydrating for pressure sand used in oil well's refill.

Working Principle:

The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Characteristics of Sand Washing Machine:

1.Simple structure, the impeller drive device is sepreated with the bearing,which greatly avoids the phenomenon of damage because of water﹑sand and pollution.

2.Compared to traditional spiral sand washing machine,it has a lot of obvious advantages such as long life, no long-term maintenance, etc.

3.It has characteristics of high degree of washing , reasonable structure.it is an high efficient equipment devoloped with the use of advanced technology, combined with the actual situation of domestic gravel industry.

4.High production, less wastage in the process of sand washing, and this sand washing machine failure rate is much lower than the commonly used sand washing machines, so it is the best option of domestic sand washing industry upgrades.

5.It is more suitable for crushing materials of mid hardness and high hardness.

6.Can crush rock into small pieces of just 0 to 15mm.

7.Suitable for crushing hard rock into quality sand.

8.High-quality, low cost and easy to operation.

9.There is little loss for medium-sized and fine sand and stone powder.

10.The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction.

Technical Data:

Notice: Any change of Sand Washing Machine technical data shall not be advised additionally.